Universal Remote CAM-DC-I Betriebsanleitung PDF herunterladen (Seite 22)

Part 3 - Remote Setup

• Use UPnP: If the camera is connected to the

network via an IP router (or NAT), select this option

to connect to the camera without setting up port

forwarding. The IP router (or NAT) must be enabled

with UPnP in order for this feature to function

properly. For more information enabling UPnP on

your IP router (or NAT), refer to the IP router or

NAT's operation manual.

Click Check to test the current port settings.

A confirmation message will appear if all the

selected ports are available for use. If not, a list of

recommended port numbers will be shown.

Click Apply to use the recommended port numbers.

• Each port number must be unique. Otherwise, you

will not be able to connect to the camera from the

remote program.

• You can connect to the camera using a media

player that supports RTSP service and monitor

its video feed. If the camera is connected to the

network via an IP router (or NAT) or is behind

a firewall, you must open the ports. (All ports if

using UDP protocol and RTSP ports if using TCP

protocol) This feature may not be supported by al

media player. In addition, video display on certain

media players may not be smooth depending on

the network status, video streaming compression

method used, and/or the resolution setting.

Connection methods are as follows:

– Via PC: Launch the media player (such as

VLC) and then enter rtsp://ID:Password@

IP Address: RTSP Port Number/

trackID='Stream Number' (Stream Number:

1 if Primary, 2 if Secondary, and 3 if Tertiary).

(e.g.: rtsp://admin:@10.0.152.35:554/trackID=1

(User: admin, Password: None, Camera IP

Address: 10.0.152.35, RTSP Port Number:

554, Stream: Primary))

– Via Mobile Device: Launch the web browser

and then enter http://IP Address:IDIS Web

Port Number/ (If Use HTTPS has been

enabled, enter https instead of http). Camera's

IDIS Web port number and RTSP port number

must be configured correctly in order to

establish a connection this way.

• Port numbers of the remote program must be

updated whenever the camera's port numbers are

changed.

• ONVIF protocol may not function if using HTTPS.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 48 49

Kommentare zu diesen Handbüchern

Keine Kommentare

Universal Remote CAM-DC-I Betriebsanleitung Seite 22

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitskameras Universal Remote CAM-DC-I