Universal Remote MRX-2 Bedienungsanleitung PDF herunterladen (Seite 4)

2

Audio Sensor Descriptions

Audio input sensor: Acts as a pass-through

from the source device to other AV devices like

an ampliﬁer or receiver.

Status LED: Glows green while connected and

glows amber when detecting an audio signal.

Delay: Adjust counter-clockwise to reduce the

amount of time before the sensor turns off once

the audio signal is no longer present.

Sensitivity: Adjust counter-clockwise to reduce

the sensitivity level; the lower the sensitivity,

the harder the sensor is to trigger. Increasing

the sensitivity makes it easier to trigger.

3.5mm plug: Connect the 3.5mm plug to a

sensor input of an MRX unit such as a MRX-10,

MRX-4SEN, MRX-1, MRX-2 etc.

● Tip: Voltage Trigger Output

● Ring 2: 5VDC Power Input

● Ring 3: NC (Not connected)

● Ring 4: Ground.

Note: The sensor can be extended up to 120ft

with two-conductor cable.

URC AUDIO SENSOR

1 2 3 4 5 6 7 8 9 10

Kommentare zu diesen Handbüchern

Keine Kommentare